EU Ship CNC accessories Upgraded DDCS V3.1 4 Axis PLC CNC lathe controller 500KHz G-Code Offline
- ship from china
- 3 axis or 4 axis PLC controller
- DDCS V3.1
- 3 axis or 4 axis
- 5 Inch TFT screen
- Input voltage:
- Milling Router machine
- Save and conitinue work after power off:
- 1 x 4 Axis DDCSV3.1 CNC Offline Controller
DDCSV3.1 is the 3 or 4 axis and 3 or 4 axes motion controller which has been researched and developed by Faster CNC for four years. The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor.
DDCSV3.1 numerical control system adopts the ARM+FPGA design framework. The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design, reliable control and easy operation.
The panel layout structure of DDCSV3.1 is rational. The CNC MOTION SYSTEM Controller can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set.
This manual introduces the operation method of the DDCSV3.1,the machine tool and the operation procedure of the machine tool. By lots of graphical representation and examples, the uses can quickly learn to use the DDCSV3.1 CNC system.
1.2 Performance parameter of Product
1) Ordinary digital input interface of 16-circuitoptocoupler coupling isolation
2) Ordinary digital input interface of 3-circuit optocoupler coupling isolation
3) Output interface of 0-10V spindle control port with analog quantity(can be modified as PWM output);
4) Support the 4 axis stepper motor control, the highest control pulse output of single axis is 500KHz;
5) ARM9 main control chip;
6) FPGA core algorithm chip;
7) 4.3 inches TFT screen, resolution ratio: 480*272;
8) 17 operational keys;
9) The main control equipment is 12V-24V power input, the current capacity is required not to be lower than 0.5A;
10) Support the USB flash disk to read the G code,and the size of G codefile has no requirement;
11) Be equipped with MPG port and support digital display MPG as well as support the general MPG in the market.
12) Support the panel key with single-axis manual operation, manual step and CONToperation;
13) Support the operation of quickly specify the running position;
14) Support the multi coordinate systems (with automatically saving function in case of power cut);
15) Support the function of saving data automatically after power down (press the start to automatically save the data in the operation, automatically save the data after power down)
1.3 Outward Appearance, Structure and Size
The DDCSV3.1 adopts the embedded shell structure, which can punch a square hole on the equipment cabinet and then embed this equipment in the squire hole. Use two locking mechanism from the inside can fix this equipment on the equipment cabinet, with easy installation.
The panel size of the product is 163mm*102mm*5mm;
The size of main body is 156mm*93mm*45mm;
The size of square hole installed on the equipment cabinet is 156mm*93mm.
The front of the product is 17 user keys and 1 4.3’’and 480*272 LSD (Liquid Crystal Display), and the reverse side is input signal, spindle control, stepper/ servo control, MPG and other four sets of interfaces as well as USB interface and power interface. Please look at the reference picture 1-3 and picture 1-4 in detail.
This USB Interface is the standard USB socket of A-type, attached a 50cm USB extension cord with installation lugs.
Item will ship within 2-4 business days on payment received
We are not responsible for wrong or undeliverable address,please
Double check your address when you write in AliExpress, if you want change before we ship out.pls notice us the new address.
Delivery time :
By China post Air Mail: 45-60 days or more
By China poat air parcel :35-45 or more
By EMS :25-30 days Brazil need to more
By DHL/FEDEX :3-8 days
If the order is during the weekends,it will take 2 days longer,we are not responsible for any delay of order if we have shipped out,because the speed of shipping is out our control, thanks for your understanding.
1.Before purchasing, pls confirm details with us if you have request on items.
2.Pls make payment within 3 days of the order if possible.
3.Alipay(escrow),Credit Card,Western Union,Bank TT, paypal etc are accepted.
Problem & Feedback
We appreciate your positive feedback and 5 stars,this item is for getting feedback rating only without any profit
If you give us the feedback after receive the goods within 3 days,will be presented the next time you purchase a beautiful gift.
1.)we care about our valued customers,and will always try to help you,hope to establish long business with you.
2.)Pls give us the opportunity to resolve any problem, we understand the concerns and frustrations you might have,and will try our best to resolve the issues.
3.)Pls contact us by Trademanager or email before leaving any negative feedback or opening any dispute on the site,we will help you to resolve the problem,
Any reason required for all refund. Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost.
When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.
Welcome worldwide customer inquire and questions,we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again.
Customer’s satisfaction is very important to us.
3 Axis/ 4 Axis CNC controller TB6560 stepper motor driver board H type $49.99 / piece $55.55 10%OFF